User manual

Appendices Phason
52
pbad
Probe damage alarm
A temperature probe is
damaged or disconnected.
 Check the wire between the control and the probe.
Any wire damage can cause the alarm.
 Replace or reconnect the temperature probe. The
control should recover automatically.
PF
Probe failure alarm
There has been a power
failure.
 Check to see why the power failed and then fix the
problem.
Err1
Error 1 - SAVER error
The TVS Saver is not in
place when trying to save
or restore settings
 Make sure the TVS Saver is inserted correctly and
then try again.