User manual

29
Chapter 4: Programming the TVS
Chapter 4 discusses how to program your TVS with the settings it uses to control your equipment.
What you need to know before programming
your TVS
Programming the TVS basically means telling the control what you want it to do with the equipment
and when you want it done. For example, for a single-speed fan set for cooling, you might say
"Switch on when the temperature reaches 80°F."
Before you begin programming your TVS, make sure:
 The control has power
 You know which equipment is connected to which stages
 You have properly connected all equipment to the correct terminals.
 You have properly configured and tested all equipment connected to the variable and relay
stages. For more information, read Chapter 3: Configuring your TVS on page 23.
Use
Appendix F: Settings worksheets on page 58 when programming your TVS.