Programming instructions

66
Ventilation Temperature Report
Ventilation Temperature Reports provide detailed temperature history. In addition to selecting the
Power Blocks you want in the report, you select a sampling interval and type.
Sampling interval
Sampling interval is how often there is an entry in the report. You can select a sampling interval of
between 10 minutes and 24 hours. In the following example, the sampling interval is 10 minutes.
9:10 68.0°F
9:20 69.5°F
9:30 70.5°F
Sampling type
Sampling type is how you read the data at the sampling intervals. If you select point data, you will get
the exact reading for that interval. If you select average, you will get the average of the data during
that interval.
 In the example above, if you select point data for sampling type and 30 minutes for sampling
interval, the temperature in the report would be 70.5°F, the actual reading at the 30-minute
interval.
 If you select average for sampling type and 30 minutes for sampling interval, the temperature in the
report would be 69.3°F, the average of the three readings during the 30 minutes.