Product Manual

Imported By: CANARM LTD., 2157 Parkedale Ave., Brockville, Ontario, K6V 5V6, Tel: [phone], Fax: [phone]
LED-SL18BK-C
SAFETY PRECAUTIONS:
DUSK TO DAWN
OUTDOOR SECURITY LIGHT
1. TURN OFF ELECTRICAL POWER BEFORE STARTING INSTALLATION OF LIGHT FIXTURE.
2. THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE BY A
PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED.
3. THIS FIXTURE CAN ONLY BE MOUNTED ON A WEATHERPROOF OUTLET BOX AND IS PROVIDED WITH
A GASKET.
4. ENSURE THAT THE OUTLET BOX IS MARKED "FOR USE IN WET LOCATIONS."
5. CONNECT THE GROUND WIRE (BARE COPPER OR GREEN) FROM YOUR FIXTURE TO THE GROUND
WIRE (BARE COPPER OR GREEN) OR GROUND SCREW IN THE ELECTRICAL OUTLET BOX.
NOTE: PRODUCT MAY NOT LOOK EXACTLY AS SHOWN IN FIGURES.
TOOLS AND MATERIALS REQUIRED:
Pliers
Phillips
Screwdriver
Wire Cutters
Wiring supplies
as required by
electrical code
L
I
G
H
T
I
N
G
&
F
A
N
S
E
C
L
A
I
R
A
G
E
S
&
V
E
N
T
I
L
A
T
E
U
R
S
QUESTIONS OR CONCERNS, CONTACT CANARM AT:
1-800-265-1833 (English)
1-800-567-2513 (French)
Monday through Friday 8:00 AM to 5:00 PM E.S.T.
!
“INSTRUCTIONS PERTAINING TO RISK OF FIRE OR INJURY TO PERSONS”
“READ ALL INSTRUCTIONS”
“IMPORTANT SAFETY
INSTRUCTIONS”
“SAVE THESE INSTRUCTIONS”
5. Insert the nipple through
the center opening of the
fixture. Secure with
decorative nut provided.
5. Place lens onto fixture
and secure with screw
provided. Apply caulking
around the fixture and it’s
mounting surface to ensure
a water tight seal.
1. Attach nipple to
mounting bracket. Adjust so
it will clear hole in back of
fixture and then lock nipple
in place with hex nut.
2. Attach mounting bracket
to electrical box with
electrical box screws (not
included).
3. Use screwdriver to
remove the lens from the
fixture.
4. Connect electrical wires
of fixture to wires in elctrical
box by marretting white to
white wire, then black wire
to black wire. Connect bare
copper wire to ground screw
on mounting bracket
using green ground screw.
INSTALLATION:
Mounting
bracket
Electrical box
White
Black
Copper wire
Ground
screw
Hex nut
Nipple
Mounting bracket
lens
fixture
centre opening
centre
opening
decorative nut
nipple
dusk to dawn
photo sensor
OPERATION:
Dusk to dawn feature is active when
light switch is on. If light switch is o
the light will not illuminate.
Fixture is approved to -25ºC