Installation Sheet

INSTALL EASY CONNECT MOUNTING BRACKET:
Electrical
Box
QUESTIONS OR CONCERNS CONTACT CANARM AT:
1-800-265-1833 (English) • 1-800-567-2513 (French)
Monday through Friday 8:00 AM to 5:00 PM E.S.T.
SAFETY PRECAUTIONS:
1. TURN OFF ELECTRICAL POWER BEFORE STARTING INSTALLATION OF
LIGHT FIXTURE.
2. THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE
INSTALLATION CODE BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND
OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED.
L
I
G
H
T
I
N
G
&
F
A
N
S
E
C
L
A
I
R
A
G
E
S
&
V
E
N
T
I
L
A
T
E
U
R
S
Black (Live)
White
(Neutral)
Green (Ground)
Attach easy connect mounting bracket
to electrical box with electrical box
screws (not included).
Easy Connect
mounting
bracket
STEP 1
EASY CONNECT®
INSTALLATION INSTRUCTIONS
L
N
!
INSTRUCTIONS PERTAINING TO RISK OF FIRE OR INJURY TO PERSONS
READ ALL INSTRUCTIONS
IMPORTANT SAFETY
INSTRUCTIONS
SAVE THESE INSTRUCTIONS
ISF626A03
10/15
STEP 4
STEP 5
Imported By: CANARM LTD., 2157 Parkedale Ave., Brockville, Ontario, K6V 5V6, Tel: [phone], Fax: [phone]
L
N
STYLE #1
STYLE #2
L
N
L
N
Connect (push) electrical
wires from electric box
(house wiring) into correct
inserts. Black (Live),
White (Neutral),
Green (Ground)
Connect (push) electrical
wires from fixture into
correct inserts.
Black (live),
White (neutral),
Green (ground)
For multiple black (live) &
white (neutral) wires joined
in the electrical box
(house wiring), attach a single
“black” and “white” Jumper Wire
before connecting. Strip 7mm
from a 6” Jumper Wires (AWG 12-24)
supplied. Then connect (push) wires
into correct inserts.
STEP 2 - Option 1
Jumper Wire
Jumper
Wire
Option 2 - MULTIPLE ELECTRICAL BOX WIRES
STEP 3
CONNECT LIGHT FIXTURE
CONNECT HOUSE WIRES
L
N
Light
Fixture
(L)
Black
(Live)
(L)
Black
(Live)
(L)
Black (Live)
(N)
White
(Neutral)
(N)
White
(Neutral)
(N)
White
(Neutral)
Green
(Ground)
Green
(Ground)
Green
(Ground)
Star
Washer
Cap
Nut
Fixture
Stud
Once wire connections are completed,
carefully tuck wires and wire nuts into
the electrical box making sure no bare
wire (on the black and white) is visible at
the wire nuts.
Position fixture over studs on mounting bracket
assembly. Secure fixture in place with star
washers and cap nuts.
Install the specified bulb type and wattage (not included).
Bulb
Shade
NOTE: Product May Not Look Exactly As Shown In Figures.