Model# IOL405BK-A 1 05-19
Welcome Guide Model# IOL405BK-A Contents: Before getting started, ensure the package contains the following components: 1 2 3 4 Part Qty Part 1 (ex. Wire Nuts) 3 Part 2 (ex. Easy Connect™ Mounting Bracket) 1 Part 3 (ex. Star Washers) 2 Part 4 (ex. Cap Nuts) 2 5 Part 5 (ex. Fixture) 1 6 Part 6 (ex. White wire) 1 7 8 Part 7 (ex. Black wire) 1 Part 8 (ex. Ground wire) 1 1 9 Part 9 (ex.
Assembly Instructions Tools And Materials Required Phillips Screwdriver Wiring supplies as required by local electrical code Step 1: Attach Easy Connect™ mounting bracket (2) to electrical box with electrical box screws (not included). 2 Electrical Box Screws (not included) N Electrical Box L White (Neutral) Black (Live) Green (Ground) Step 2: Option 1- Connect (push) electrical wires from electrical box (house wiring) into correct inserts.
Assembly Instructions Step 3: Connect (push) electrical wires from fixture (5) into correct inserts. (L) Black (Live) (N) White (Neutral) N L 5 Green (Ground) Step 4: Tuck electrical wires into electrical box and position fixture (5) over studs on mounting bracket (2) assembly. Secure fixture (5) in place with star washers (3) and cap nuts (4). Stud 4 5 3 Step 5: Install specified bulb (9) type and wattage.
Assembly Instructions Step 6: After Installation, seal around the top and side perimeter between the fixture and the wall surface with weather resistant caulking. The bottom should be left un-caulked to prevent moisture build-up. Apply a small amount of weather resistant caulking around the side perimeter between the cap nut and mounting plate.
Cleaning and Maintenance • To clean, turn off and wipe with a damp, non-abrasive cloth. • When cleaning, use only a soft brush or lint free cloth to avoid scratching the finish. • Abrasive cleaning agents are not required and should be avoided to prevent damage to finish. Safety • Turn off electrical power before starting installation of light fixture.
