Installation Instructions

INSTALLATION:
SAFETY PRECAUTIONS:
EASY CONNECT®
INSTALLATION INSTRUCTIONS
!
INSTRUCTIONS PERTAINING TO RISK OF FIRE OR INJURY TO PERSONS
READ ALL INSTRUCTIONS
IMPORTANT SAFETY
INSTRUCTIONS
SAVE THESE INSTRUCTIONS
1. TURN OFF ELECTRICAL POWER BEFORE STARTING INSTALLATION OF LIGHT FIXTURE. DO NOT REMOVE
INSULATION FROM FIXTURE.
2. WIRING SUPPLIES AS REQUIRED BY LOCAL ELECTRICAL CODE.
3. THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE BY
A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE
HAZARDS INVOLVED.
4. CAUTION – RISK OF FIRE. CONSULT A QUALIFIED ELECTRICIAN TO ENSURE CORRECT BRANCH
CIRCUIT CONDUCTOR.
5. TO CLEAN THE FIXTURE, TURN OFF THE POWER, WAIT FOR IT TO COOL, AND WIPE THE FIXTURE WITH
A CLEAN, SOFT CLOTH.
NOTE: Product may not look exactly as shown in figures.
QUESTIONS OR CONCERNS CONTACT AT:
1-800-265-1833 (English) / 1-800-567-2513 (French)
Monday through Friday 8:00 AM to 5:00 PM E.S.T.
Tel: [phone], Fax: [phone]
3. Connect (push) electrical
wires from fixture into correct
inserts.
4. Once connections of wires
are completed, carefully tuck
wires and wire nuts into the
electrical box making sure no
bare wire (on the black and
white) is visible at the wire nuts.
5. Tuck electrical wires into
electrical box and position
fixture over studs on mounting
bracket assembly. Secure fixture
in place with star washers and
cap nuts.
6. Attach the stem to the
fixture.
7. Install proper bulb type and
wattage (not included).
8. Secure the glass in place
using the fiber washer, hex nut
and finial.
IOL431
01/19
1. Attach easy connect
mounting bracket to
electrical box with electrical
box screws
(not included).
2. Option 1: Connect
(push) electrical wires from
electric box
(house wiring) into correct
inserts.
Option 2: For multiple green
(ground), black (live) and
white (neutral) wires joined
in the electrical box (house
wiring), attach a single
“green”, “black” and “white”
jumper wire before
connecting. Strip 7mm from
the 6” jumper wires (AWG
12-24) supplied. Then
connect (push) wires into the
correct inserts.
L
N
Option 1
Option 2
Black (Live)
White
(Neutral)
Green (Ground)
Easy Connect
mounting
bracket
(L)
Black
(Live)
(L)
Black (Live)
(N)
White
(Neutral)
(N)
White
(Neutral)
Green
(Ground)
Green
(Ground)
Jumper Wire
Jumper Wire
Electrical
box screws
Electrical
Box
L
N
L
N
L
N
Fixture
(L)
Black (Live)
(N)
White
(Neutral)
Green
(Ground)
Star
Washer
Cap
Nut
Fixture
Stud
Bulb
Stem
Fiber
washer
Hex Nut
Finial
Glass