Installation Sheet

Step 3 Step 4
Step 5 Step 6
Step 7
Star
Washer
Cap Nut
Weather
Resistant
Caulking
(not included)
After Installation, seal around the top and side perimeter between
the fixture and the wall surface with weather resistant caulking.
The bottom should be left un-caulked to prevent moisture
build-up. Apply a small amount of weather resistant caulking
around the side perimeter between the cap nut and mounting plate.
Install the proper bulb type and wattage (not included).
2
Tel: [phone], Fax: [phone]
Black (Live)
White
(Neutral)
Green (Ground)
Easy Connect
mounting
bracket
Electrical
Box
Electrical box screws
L
N
L
N
L
N
Option 1
Option 2
(L)
Black
(Live)
(L)
Black (Live)
(N)
White
(Neutral)
(N)
White
(Neutral)
Green
(Ground)
Green
(Ground)
Jumper Wire
Jumper Wire
Option 1: Connect (push)
electrical wires from
electric box (house
wiring) into correct
inserts.
Option 2: For multiple
black (live) & white
(neutral) wires joined in
the electrical box (house
wiring), attach a single
“black” and “white”
Jumper Wire
before connecting. Strip
7mm from a 6” Jumper
Wires (AWG 12-24)
supplied. Then connect
(push) wires into correct
inserts.
Fixture
(L)
Black (Live)
(N)
White
(Neutral)
Green
(Ground)
L
N
Connect (push) electrical wires from fixture into
correct inserts.
Tuck electrical wires into electrical box and
position fixture over studs on mounting bracket
assembly. Secure fixture in place with star washers
and cap nuts.
Stud
Attach easy connect mounting bracket to electrical
box with electrical box screws (not included).
Bulb