Installation Sheet

1.
INSTALL MOUNTING BRACKET
4
Canopy
J-Hook
Ceiling
- Install J-Hook through centre of outlet box and into the wooden joist.
- Secure mounting bracket and rubber gaskets to outlet box.
- Hang the safety cable onto the J-hook.
- Hang fan on mounting bracket.
WARNING: To Reduce The Risk Of Fi re, Electric Shock, Or Personal
Injury, Mount To UL/CSA Listed Outlet Box Marked Acceptable for
Fan Suppo rt And Use Mounting Sc rews Provided With The Outlet Box.
J- Hook
Safety
Cable
Outlet box
Screws
(not provided)
CAUTION
SEE SAFETY PRECAUTIONS ON
PG. #2 BEFORE WIRING
Green Wire - GROUND
Black Wire (Fan) - POWER
White Wire (Fan) - COMMON
Red or Blue Wire (Light Kit) - POWER
ELECTRICAL HOOK UP
- There are several different wiring combinations that can be used in
controlling your ceiling fan to meet your specific requirements. Should
the following method not meet your requirements call or visit your nearest
Canarm distributor for a full list of fan accessories.
-
-
After making the wire connections, ensure the wires should be spread
apart with the grounded conductor and the equipment-grounding
conductor on one side of the outlet box and the ungrounded conductor
on the other side of the outlet box.
Ensure the splices after being made should be turned upward and
pushed carefully up into the outlet box.
Wood
Joist
Outlet Box
Rubber
Gasket
Mounting
Bracket
2.
Fig. 2a
Fig. 2b
7
Mount the blade on motor assembly.
INSTALLATION
FINAL
Blade
Bracket Screw
Blade
Motor
Lock Washer
Fibre
Bracket
Gasket
Fig. 6
5.