Installation Instructions

Tighten the canopy of jam screw.
Mount the blade on motor assembly.
INSTALLATION OF W ALL CONTROL
Pg. #6
Pg. #7
3
3
.
.
4
4
.
.
INSTALLATION
FINAL
Blade
Bracket Screw
Blade
Motor
Lock Washer
Fibre
Bracket
Gasket
Fig. 5a
Fig. 5b
Jam Screw
Jam Screw
Ceiling
Canopy
A
B
Fig. 4
Connect BLACK wall control wire (marked with “AC in L”) to the
BLACK wire form main power on the wall outlet box.
Connect BLACK wall control wire (marked with “TO Motor L”) to the
BLAKC wire that connected to the BLACK wire of the fan from ceiling.
- Connect the wires as shown.
- Install the mounting plate to the outlet box by 2 outlet box
- Carefully push wire nuts into the outlet box after connections.
screws (not supplied).
- Push firmly the front cover into the wall unit.
FAN SPEED CONTROL
LOW
HIGH
4
3
2
1
0
Fig. 6
Wire Nut
BLACK wire
KNOB
FRONT COVER
SCREW
BLACK
AC IN L
TO MOTOR L
BLACK
OUTLET BOX
(from main power)
(from ceiling outlet box)
BLACK wire
WHITE
(when
applicable)