Installation Instructions

Pg. #2
Pg. #11
WARNING
1.
To reduce the risk of personal injury DO NOT bend the blade brackets
when installing the brackets, balancing the blades or cleaning the fan. Also,
DO NOT insert foreign objects in between rotating fan blades.
Mount with the lowest moving parts at least
above
floor or grade level.
SAFETY PRECAUTIONS
1. Turn off power at main electrical service box before starting installation.
2. Electrical connections must comply with local code ordinances, national
electrical codes, CEC, NEC and ANSI/NFPA 70.
3. Make sure the installation site you choose allows the fan blades to rotate
freely without any obstructions.
4. When mounting the fan on a ceiling outlet box, Use an approved (CSA for
Canada and UL for U.S.) ceiling fan box marked "FOR FAN SUPPORT".
5. WARNING: To reduce the risk of fire, electric shock, or personal injury,
6. Total Fan Weight: approximate 5.5 kgs (12.13 lbs).
mount fan only to an outlet box marked acceptable for fan support and use
mounting screws provided with the outlet box. Most outlet boxes commonly
used for the support of lighting fixtures are not acceptable for fan support
and may need to be replaced. Consult a qualified electrician if in doubt.
Remove fan from the carton carefully and check for shipping damage.
Check blades for bends and dents. In case assistance is required please
contact our service centre.
All set screws must be checked and re-tightened where necessary after
installation. No lubricants should be used on screws
or hooks.
To
reduce the risk of personal injury install the safety cable (per Fig. 1).
DO NOT attach blades before hanging the fan.
2.
3.
To reduce the risk of fire or electrical shock, ONLY use WAROF-02 wall
control for speed control.
7.
4.
5.
6.
3.05 Meters
(10 Feet)
Ensure the outlet box is securely installed in place such that it is able to
support at least the fan weight.