Instructions / Assembly

pg. 8
Figure 14
Insert the blades through the blade slot in
the decorative housing. Align the holes in
blade and blade bracket, secure with the
screws and fiber washers provided. (Fig. 14)
9. ATTACHING THE FAN BLADES
Figure 15
NOTE: Before starting installation,
disconnect the power by turning off the
circuit breaker or removing the fuse at fuse
box.
Step 1. Step 1. Remove the 1 of 3 screws
from the mounting ring and keep it for future
use. Loosen the other 2 screws (Do not
remove)
Step 2. While holding the switch housing
under your fan, snap together the wire
connection plug. (Fig. 15)
Step 3. Tuck connections neatly into switch
housing, Place the light kit key holes over
the 2 screws previously loosened from the
mounting ring, turn switch housing until it
locks in place at the narrow section of the
key holes. Secure by tightening the 2
screws previously loosened and the one
previously removed.
10. INSTALLING THE THE SWITCH HOUSING
Blade
Slot
Screws with
fiber washers
Mounting ring
Connection plugs
Switch housing
Screws