Instructions / Assembly

pg. 4
4. MOUNTING OPTIONS
If there isn't an existing CUL listed
mounting box, then read the following
instructions. Disconnect the power by
removing fuses or turning off circuit
breakers.
Secure the outlet box directly to the
building structure. Use appropriate
fasteners and building materials. The
outlet box and its support must be able
to fully support the moving weight of the
fan (at least 35 lbs). Do not use plastic
outlet boxes.
Figures 1, 2 and 3 are examples of
different ways to mount the outlet box.
Note: You may need a longer downrod
to maintain proper blade clearance
when installing on a steep, sloped
ceiling. (Fig. 3)
To hang your fan where there is an
existing fixture but no ceiling joist, you
may need an installation hanger bar as
shown in Figure 4.
Outlet box
Provide strong
support
Recessed
outlet box
Outlet box
Figure 1
Figure 3
Figure 4
Outlet box
Figure 2
ANGLED CEILING
MAXIMUM 20° ANGLE
Ceiling
hanger
bracket