Instructions / Assembly

pg. 10
Figure 19
Figure 18
Turn on the power and check the operation
of your fan.
The pull chain controls the fan speed as
follows: 1 pull - High, 2 pulls - Medium, 3
pulls - Low, and 4 pulls - Off.
The pull chain controls the light as follows:
1 pull - Lightest, 2 pulls - Medium ligh, 3
pulls - Darker, and 4 pulls - Off.
Speed settings for warm or cool weather
depend on factors such as the room size,
ceiling height, number of fans and so on.
The Reverse switch is located on the
switch housing. Slide the switch to the
Left for warm weather operation. Slide the
switch to the Right for cool weather
operation.
NOTE: Wait for fan to stop before
changing the setting of the slide switch.
Warm weather - (Forward) A downward
airflow creates a cooling effect as shown
in Fig. 18. This allows you to set your air
conditioner on a warmer setting without
affecting your comfort.
Cool weather - (Reverse) An upward
airflow moves warm air off the ceiling area
as shown in Fig. 19. This allows you to set
your heating unit on a cooler setting
without affecting your comfort.
13. OPERATING YOUR FAN