Instructions / Assembly

Pg. #6
Pg. #7
ELECTRICAL HOOK-UP
NOTE: Once ground wires are connected, carefully tuck all wires and wire nuts
into the metal outlet box making sure that the wires are clear of the
hemisphere and downrod when positioned in mounting bracket.
Make the following wire connections to the receiver unit (see fig. 5) using the
wire nuts supplied.
- Connect GREEN fan wire to BARE (ground) wire.
- Connect BLACK receiver unit wire to BLACK supply wire.
- Connect WHITE receiver unit wire to WHITE supply wire.
B
In Quebec, the installation of this product must
be carried out by a qualified electrician.
-
-
After making the wire connections, ensure the wires should be spread
apart with the grounded conductor and the equipment-grounding
conductor on one side of the outlet box and the ungrounded conductor
on the other side of the outlet box.
Ensure the splices after being made should be turned upward and
pushed carefully up into the outlet box.
4.
INSTALL MOUNTING BRACKET
- Install J-Hook through centre of outlet box and into the wooden joist.
- Secure mounting bracket and rubber gaskets to outlet box.
- Hang the safety cable onto the J-hook.
WARNING: To Reduce The Risk Of Fire, Electric Shock, Or Personal
Injury, Mount To UL/CSA Listed Outlet Box Marked Acceptable for
Fan Support And Use Mounting Screws Provided With The Outlet Box.
ELECTRICAL HOOK-UP
A
- Hang fan on temporary hook or mounting bracket.
Fig.4a
Fig.4b
3
3
.
.
4.
Ceiling
Outlet box Screws
(Not provided)
J-Hook
Safety
Cable
Canopy
J-Hook
Wood Joist
Outlet Box
Rubber Gasket
Mounting Bracket
120V
SUPPLY CIRCUIT
Fig.5
BOX
OUTLET
BLUE
WHITE
WHITE
BLACK
BLUE
WHITE
BLUE
WHITE
RED
PINK
BROWN
GREEN
GREEN
GREEN
WHITE
BLACK
GROUND
GROUND TO DOWNROD
GREEN
RED
PINK
BROWN
RECEIVER
- Push all connected wires up into ceiling box.
- Position the receiver into the canopy as shown direction.
Reciever
Mounting
Bracket
Canopy
Fig.6
-
Connect the 4-Wire female and male plug.
-
Connect the 2-Wire female and male plug.
- When installing
the canopy, ensure
the antenna is not
pressed by the canopy.
Fan Motor