Instructions / Assembly

ManualsBrandsCANARM ManualsCeiling FansHollyn 52 in. Integrated LED Indoor Matte Black Downrod Mount Ceiling Fan with Light Kit and Remote Control

Pg. #3

Pg. #10

WARNING: Ensure that all connections, set screws and screws are

securely tightened before the next step.

To clean the fixture, turn off the power, wait for it to cool, and wipe the

fixture with a clean, soft cloth.

LIGHT KITS

Fig.9c

ASSEMBLY DRAWING

A. Mounting Bracket

B. Canopy

C. Downrod Assembly

D. Yoke Cover

E. Fan Motor Assembly

G. Glass Panel

Fig.1

Light Kit

H. Diffuser

I. Remote Control

J. Fan Blade

Motor

KitLight Kit

Diffuser

TROUBLESHOOTING

TROUBLE

SUGGESTIONS

1. Fan will not start

- Check wiring connections in switch housing.

CAUTION: Turn power off for last two items.

2. Fan sounds noisy - Check to make sure that all screws in motor housing are snug.

- Check to make sure that blade bracket screws are tight.

- Check to make sure that wire nuts

in switch housing

are not rattling against wall of switch housing.

- If fan has a light kit make sure switch housing

screws and set screws are tight.

- Some fan motors are sensitive to signals from solid

state variable controls. If solid state controller is

used, change to an alternative control. (See a

representative for a list of available controls.)

- Allow a 24 hour break in period to eliminate most noises.

3. Fan wobbles - Check that all blades are screwed firmly into blade brackets.

or shakes

excessively.

- Check that blade brackets are secured firmly to motor.

- Check distance from tip of blades to ceiling.

- Check distance between blade tip to blade tip. All

measurements should be equal.

Loosen blade

screws and position blade until even then re-tighten.

- Check that the downrod hemisphere notch is engaged in canopy.

- Check to make sure that jam screws in downrod are tightened.

- Make sure canopy and mounting bracket are

tightened securely to wooden joist.

- Make sure warpage has not occurred in Fan

blades. If so, contact the customer service department

for replacement parts.

For model Duke

For model Hollyn

- Check fuses and circuit breakers.

- Check wiring connections to fans.