Installation Sheet

1
1
.
.
ATTACH THE FAN BLADES
Pg. #4
Pg. #9
INST
INST
ALLA
ALLA
TION
TION
NOTE:
All set screws must be checked and
retightened where necessary, before and after
installation.
- Remove light kit screws and washers.
- Connect polarized connectors of light kit to corresponding connectors
found in switch housing.
WARNING: BE SURE TO TURN OFF POWER
BEFORE INSTALLING
- Carefully tuck electrical wires back into switch housing, align light kit with
switch housing and secure with three light kit screws and washers.
LIGHT KITS
DETACHABLE LIGHT KITS
for your model)
(Refer to one of the following light kits
2
2
.
.
Motor Screw
Motor
Motor
Blade
Blade
- Attach the blades to the
fan motor assembly using
the screws.
- Insert the blade arm into the
fan as shown.
Fig.2a
Fig.2b
ELECTRICAL HOOK-UP
- Push all connected wires up into ceiling box.
Position the receiver into the canopy as shown direction.
C
6.
6.
Fig.9b
ANTENNA
(Leave unconnected
and do not cut)
VIEW AFTER INSTALLATION
Mounting
Plate
Reciever
Fig.9a
BLACK
BLUE
WHITE
Canopy
ANTENNA
WHITE
BLACK
120V
SUPPLY
CIRCUIT
Fan
BLACK
WHITE
BLUE