Installation Instructions

Pg. #8
Pg. #5
ELECTRICAL HOOK-UP
B
NOTE: Once ground wires are connected, carefully tuck all wires and marrettes
into the metal outlet box making sure that the wires are clear of the
hemisphere and downrod when positioned in mounting bracket.
In Quebec, the installation of this product must
be carried out by a qualified electrician.
White Wire
Blue or Red
or Black Wire
Light Kit
Lock
Light Kit
Screws
washer
Motor
3
3
.
.
6.
6.
- Attach the upper cover to the top housing.
Lock
washer
Upper Cover
Screws
Screws
Cover
Star
washer
Bulb
(not provided)
Fig.3
Fig.4a
Upper Cover
Lower
120 V
SUPPLY CIRCUIT
Fan
Fig.8
Lock
washer
Upper Cover
Screws
Lower Cover
Star Washer
Bulb
Fig.4b
Upper Cover
Lower Cover Screws
WARNING: To reduce the risk of injury to persons, ensure the fan
lower cover is securely attached on the fan upper cover before use.
For model Aria :
For model Andi :
Lower Cover
Fig.4b
Fig.4a
Make the following wire connections to the receiver unit (see fig. 6) using the
wire nuts supplied.
-
connect GREEN fan wire to BARE
(ground) wire.
-
connect BLACK receiver unit wire to BLACK supply wire.
- connect WHITE receiver unit wire to WHITE supply wire.
- connect WHITE receiver unit wire (MOTOR N) to WHITE fan wire.
- connect BLACK receiver unit wire (MOTOR L) to BLACK fan wire.
- connect BLUE receiver unit wire (FOR LIGHT) to BLUE light wire.
- After making the wire connections, ensure the wires should be spread
apart with the grounded conductor and the equipment-grounding
conductor on one side of the outlet box and the ungrounded conductor
on the other side of the outlet box.
- Ensure the splices after being made should be turned upward and
pushed carefully up into the outlet box.