Maintenance Manual

CANAM TECHNOLOGY, INC. (CTI)
MARK-IV VHF NARROWBAND SIGNAL BOOSTER
OPERATIONS & MAINTENANCE (O&M) MANUAL
Page 29 of 37
Rev0 May/2011
Figure 12 – Main Status page
This page shows meters and the different alarms. The auto-refresh radio-
button allows periodic page updates every 5 seconds approximately.
Summary Alarm
Master Summary alarm Indicator. Green if no single
alarm is present in the system, Red otherwise.
SNMP Agent
Shows the SNMP Agent current status (It is disable for
this model).
MCPA’s Meters and Status
Status
Indicates if the MCPA Output is “Unmuted”,
“Muted” or “Muted”.
Current Drain Idc (A)
Power Amplifier DC current drain.
The Status indicator will be green when the current
is within the operating levels, red otherwise.
Temperature (ºC)
Power Amplifier heat-sink temperature.
The Status indicator will be green when the
temperature is within the operating levels, red
otherwise.
Modules Status
Indicator is Green if module is active with no alarms,
red otherwise.