Maintenance Manual

CANAM TECHNOLOGY, INC. (CTI)
MARK-IV VHF NARROWBAND SIGNAL BOOSTER
OPERATIONS & MAINTENANCE (O&M) MANUAL
Page 20 of 37
Rev0 May/2011
Section F. WEB-SERVER GRAPHICAL USER INTERFACE
F.1 First-Time Start Configuration
The system can be connected directly to PC computer using an Ethernet
crossover cable or to LAN using a standard straight-thru cord when using a
network switch/hub connection
Before to access system built-in Web Server verify your web browser is
working with java script enabled.
These are some web links showing HOW-TO enable java script.
http://support.mozilla.com/en-S/kb/Javascript#Enabling_and_disabling_JavaScript
http://support.microsoft.com/kb/154036
http://www.google.com/support/chrome/bin/answer.py?answer=114662
F.1.1 Connecting System directly to PC computer
Use an Ethernet crossover cable for direct connection to a PC
computer LAN port.
Figure 5 – System connected directly to PC computer.
Connect the system to PC computer directly into the ECM LAN port.
The IP address of the equipment is shown in the LCD display. By default
it is 192.168.100.87 with Network Mask = 255.255.255.0.