Operation and Maintenance Manual

CANAM TECHNOLOGY, INC. (CTI)
MARK-IVD 800MHZ NARROWBAND SIGNAL BOOSTER M4DBDA8 O&M MANUAL
Page 36 of 46
Rev1 May/2015
Input Composite Power and iALC
Input RF Composite
Power (Multicarriers)
(dBm)
Received level (composite) near or within the
limiter range.
For RSSI per filter window above -105dBm please go
to Filters Status page.
iALC Start Level (dBm)
Input Automatic Level Control limiter threshold.
iALC Attenuation (dB)
Input Automatic Level Control attenuator dynamic
value. Valid for CW signals, intended for
maintenance purposes.
The Status indicator will be green when the value is
less than 1; yellow is the value is greater than 1 but
less than 15; red otherwise.
The iALC input Attenuation is automatically set by
the system in order to limit the Input RF Composite
Power at the value indicated as iALC Set Point. If
the Input RF Composite Power is greater than iALC
Start Level it is attenuated to avoid system
saturation.