Operation and Maintenance Manual

CANAM TECHNOLOGY, INC. (CTI)
MARK-IVD 800MHZ NARROWBAND SIGNAL BOOSTER M4DBDA8 O&M MANUAL
Page 30 of 46
Rev1 May/2015
User may change the radio system’s IP Address to a different subnet setting if
desired.
1. First, it is necessary to connect system directly to PC Computer using
the crossover cable.
2. Open a web browser and access the equipment by typing, in the
address bar, the IP address of the equipment.
o Login with username = technician, password = technician.
3. Go to the “Network Settings” page (see left-side menu) to change the
current settings to be assigned by the network administrator.
o IP Address, Network Mask, Gateway Address.
o The controller requires a fix address; it does not allow DHCP settings.
o Enter or press “Apply” button to apply the new parameters, and
then restart the system.
o Now the system controller can be plugged into the local area
network served by your LAN Switch or Router.