Operation and Maintenance Manual

CANAM TECHNOLOGY, INC. (CTI)
MARK-IVD 800MHZ NARROWBAND SIGNAL BOOSTER M4DBDA8 O&M MANUAL
Page 16 of 46
Rev1 May/2015
Local Human-Machine-Interface
LCD display with 7-button keypad, plus LED
Indicators
Factory-Programmable-function Discrete Digital I/O
(Dry contact, voltage-free)
4 Relay output contacts
4 Opto-isolated inputs
Internal Sensors, overall system
Temperature, DC Voltage/Current,
Locked-rotor cooling fan monitoring,
Output RF Forward & Reverse,
Input RF Composite Power (DL and UL)
True-RMS RF Detectors/Limiters (In/Out)
CUSTOM BUILD OPTIONS
Duplexer/Multiplexer filters for common Tx/Rx antenna, or separate DL and UL paths (custom build)
Low noise RF-over-Fiber-Optic transceiver
Multi Carrier Power Amplifiers (MCPA) are optional per system requirements
CTCSS Analog PL Tone Detection
NFPA72-2010 compliant or Custom Input/Output status/monitoring functionality, for example: Open
door, Low-Battery, AC Power Failure, Smoke detector, Strobe light or Siren indicator, etc.
Sensors DC Voltage Buffered Outputs 0-5V for external SCADA monitoring: MCPA DC Voltage/Current,
Composite RF Output power, Temperature, RF output, ALC monitor, or others upon custom demand.
Frequency (shift) in-band translator