Operation and Maintenance Manual

CANAM TECHNOLOGY, INC. (CTI)
MARK-IVD 800MHZ NARROWBAND SIGNAL BOOSTER M4DBDA8 O&M MANUAL
Page 15 of 46
Rev1 May/2015
Parameter
Specification
MAJOR SOFTWARE DEFINED FIELD-PROGRAMMABLE SETTINGS
Narrowband Filters selectivity and bandwidth
(firmware system personality)
Filters central frequencies (Fo) in 3.125 KHz steps
Input (Rx) Threshold level, per narrowband window/filter
Output Power level, per channel or overall
Receive Signal Strength Indicator level – RSSI, per window
Number of filters per path (depending on selected
firmware mask)
10 or 20
CTCSS PL Tone detection (programmable)
OTHER
4RU or 6RU Rackmount enclosures (total rack space
depends on custom filtering requirements per actual
user frequency plan)
NEMA-1
Wallmount enclosure (NEMA 12/4/4X)
Available upon request
Duty Cycle
100 %
Operating ambient temperature range
-30 to +60° Celsius standard
MBTF
> 50,000 hours (RF only)
> 40,000 h (fiber-fed)
Power requirements @ full load
(actual power draw depends on actual system
configuration)
300 Watt max @ 100-240 Vac, 50/60 Hz
28 VDC input OPTIONAL
FIBER OPTICS (optional)
Frequency Range
10 – 1000 MHz
Gain Flatness
±1 dB
Input Third Order Intercept
+13dBm
Noise Figure / Noise Floor
23dB / -110dBm @ 10kHz BW
Laser Type
DBF / 1310nm ± 20nm (CWDM available)
Parameter
Specification
INTERFACES, REMOTE CONTROL AND MONITORING
Non-Intrusive (tap) coax RF ports
Type-N (female), 50 Ohm
Network remote control (Ethernet 10/100)
TCP/IP: web server, SNMP
PC Software
Any generic web-browser
Local Debug Port
Serial RS-232