User's Manual

CANAM TECHNOLOGY, INC. (CTI)
MARK-IV VHF BROADBAND SIGNAL BOOSTER M4BBDAV USER’S MANUAL
Page 11 of 13
Rev0 April/2015
D.2 USING AND SETTING UP D.U.T
1. Open a web browser and access the equipment by typing, in the
address bar, the IP address assigned to the equipment.
o Login with username = technician, password = technician.
o The Main Status page will be displayed if connection available.
2. Go to Calibration page for:
o Changing meters calibration and another parameters as sub-
system maximum gain and minimum readable for some meters.
3. Go to Main Settings page for:
o Enabling/disabling MCPA output per path.
o Enabling/disabling MCPA ALC and configuring ALC limit level
between 30 -37 dBm.
o Configuring path gain and iALC set-point Level.