Operation and Maintenance Manual

CANAM TECHNOLOGY, INC. (CTI)
MARK-IV VHF BROADBAND SIGNAL BOOSTER M4BBDAV O&M MANUAL
Page 32 of 39
Rev0 April/2015
This page shows meters and the different alarms as well as the iALC (input
ALC). The auto-refresh radio-button allows periodic page updates every 10
seconds approximately.
Summary Alarm
Master Summary alarm Indicator. Green if no single
alarm is present in the system, red otherwise.
This alarm is mapped to ECM I/O DB25 Connector and
can be access through pins; 14, 15 and 16.Also, it is
shown as status indicators LED 1and LED5 in ECM
panel.
UL Subsystem
Shows the UL subsystem current status.
Indicator is Green if UL iALC modules are active
without alarms; red otherwise.
DL Subsystem
Shows the DL subsystem current status.
Indicator is Green if 8DL & 7DL MCPA Reflected Power
Alarm is cleared and iALC modules are active without
alarms; red otherwise.
SNMP Agent
Shows the SNMP Agent current status. Enabled subject
to license.