Operation and Maintenance Manual

CANAM TECHNOLOGY, INC. (CTI)
MARK-IV VHF BROADBAND SIGNAL BOOSTER M4BBDAV O&M MANUAL
Page 15 of 39
Rev0 April/2015
Control Interfaces
Local Human-Machine-Interface
LCD display with 7-button keypad
LED Indicators
Computer Network Interface (RJ45 Ethernet 10/100)
Embedded Web-server and SNMPv2 support over
TCP/IP
Serial Port
USB (factory debug)
Factory-Programmable-function Discrete Digital I/O
(Dry contact, voltage-free)
4 Relay output contacts 4 Opto-isolated inputs
Mechanical & Environmental
Wall-mount enclosure
Painted or Stainless-steel NEMA-4X (option)
Actual Size depends on Frequency Plan
Rack-mount
19 inches depth
Height depends on actual frequency plan
Operating ambient temperature range
-20 to + 60° Celsius, 100% duty cycle
Cooling
Natural Convection (wallmount)
Forced ventilation (rackmount)
MBTF
> 100,000 hours
> 70,000 hours (fiber-fed versions)
Power Requirements
400W, 100-240 Vac 50/60Hz
Internal Built-in Sensors
DC Voltage(s), DC Current(s), Composite Forward
RF output power, Composite Reverse RF power,
ALC level
Optional Optical Interface over Single-mode fiber
(optional)
Laser Optical Output Power
4 mW
Operating Wavelength
1310 nm
Frequency Response (380-512 MHz )
± 1.5 dB
Input/Output Impedance
50 Ohm
Input/Output VSWR (50-2500 MHz)
1.5:1
RF Link Gain
0 dB
Input Noise Floor
-137 dBm/Hz
Input Third Order Intercept
+30 dBm
Custom Build Options
Duplexer for common Tx/Rx antennas, or completely separate DL and UL paths. 50-Ohm Coaxial Type-N
Fiber-fed, integrated very low noise RF/Optic transceivers