Operation and Maintenance Manual

CANAM TECHNOLOGY, INC. (CTI)
MARK-IV VHF BROADBAND SIGNAL BOOSTER M4BBDAV O&M MANUAL
Page 10 of 39
Rev0 April/2015
Nevertheless, there are Safety Precautions that should be adhered when
performing any RF Tests:
1. Never Operate a Transmitter, or Booster Amplifier without adequate
Load/Termination on the Output Port.
2. Ensure all Connections are tight and secured.
3. Ensure all Coaxial Cable Insulation covers the Outer Shield of the
cable.
4. Do Not Touch Exposed System Ports or Coaxial Cable if system is
Transmitting.
38
RF Signs
Sign Examples
C.5 MOVING PARTS
1. The system has moving parts as fans.
2. Keep your hands and tools away from moving parts.
3. When servicing and wiring unit, be aware main power switch be in
the OFF position and all moving parts are stopped.