User's Manual

Canam Technology, Inc. (CTI)
MARK-IV CHANNELIZED (Class A Narrowband) SIGNAL BOOSTER WITH AUTOMATIC
OUTPUT LEVEL CONTROL M4-ChOLC
User’s Operations and Maintenance Manual (O&M)
Section F. M4-ChOLC Adjustments
The equipment adjustments should only be performed by qualified technical personel.
These adjustments are set through the system optimization, and they may be changed only
during equipment service and repair.
F.1 M4-ChOLC Channel Frequency Programming
The M4-ChOLC Operating Frequency can be changed using Canam Technology’s
proprietary software application.
WARNING: The application is intended to be used with Canam’s M4-ChOLC
only. The use of this software with any other equipment may cause the
equipment and / or the application to function incorrectly.
Please follow the next steps in order to install it.
1. Go to “My PC”, then click on the CD-ROM Drive.
2. Double click on the setup.exe application in the CTI CD-ROM, see
Figure 8.
Figure 8: Installing the application utility for the M4-ChOLC
MARK-IV CHANNELIZED Signal Booster module (M4-ChOLC) O&M Manual Page 13 of 20