Specification

Owners Manual
4
Spa operation - Hot tub controls / Jets
Spa operation - Jets
Air Controller
These are located around the top of your
spa. Increase or decrease the force of your
jets by opening or closing the air control
valves.
Air Jet (pepper pot)
Linked to the blower to inject air into the spa
for an invigorating massage.
Aroma basket cap
Open cap to place aromatherapy beads.
Close after use.
Circ Jet
Supplies Ozone and heated water from the
circulation pump.
2” Twin Roto jet
Adjustable and interchangeable jet spins
and pulsates. The jet can be removed by
turning it counter-clockwise. To replace the
jet push inward and clockwise until it clicks
into place.
3” Directional jet
Adjustable and interchangeable jet features
a directional nozzle. The jet can be removed
by turning it counter-clockwise. To replace
the jet push inward and clockwise until it
clicks into place.
3” Massage jet
Adjustable and interchangeable jet which
spins to deliver a soothing massage. The jet
can be removed by turning it counter-
clockwise. To replace the jet push inward
and clockwise until it clicks into place.
2” Directional jet
Adjustable and interchangeable jet features a
directional nozzle. The jet can be removed by
turning it counter-clockwise. To replace the
jet push inward and clockwise until it clicks
into place.
5” (Jumbo) Directional jet
Adjustable and interchangeable jet features
a directional nozzle. The jet can be removed
by turning it counter-clockwise. To replace
the jet push inward and clockwise until it
clicks into place.
Large Diverter
Located on the topside of the spa, this valve
physically diverts the flow of water from one
jet zone of the spa to the other.
5” Massage jet
Adjustable and interchangeable jet features
an internal spinner to deliver a low pressure
soothing massage. The jet can be removed
by turning it counter-clockwise. To replace
the jet push inward and clockwise until it
clicks into place.
2” Point jet
Standard jet is permanently on and supplies
heated water continually. The jet can be
removed by turning it counter-clockwise. To
replace the jet push inward and clockwise
until it clicks into place.
Waterfall control
Located on the topside of the spa, this valve
adjusts water flow to the waterfall.
HOW JETS WORK
Air is mixed with the water by using the air controls to create massage(s) of varying degrees. Water flow is adjusted by simply turning the
outer face of the full sized jets. Our hot tubs have a combination of pulsating, rotating, and directional adjustable jets.