Instructions / Assembly

Owners Manual
To Set a Different Home Screen, in Navigation Mode, with Settings
Highlighted, Touch Select to Open the Settings Menu. Scroll Down,
and with Home Screen Highlighted, Touch Select or Right to Open
the Home Screen Menu. Then Scroll to the desired Home Screen and
Touch Select to turn On the Selected Home Screen. Touch Back Home
to Exit back to the Selected Home Screen.
Set the Language - The Default Language is English, but you may
have other Languages available on your Spa. If your desired Lan-
guage is not Listed on the Language Menu, it may be available from
your Spa Manufacturer.
To Set your desired Language, in Navigation Mode, with Settings
Highlighted, Touch Select to Open the Settings Menu. Scroll Down,
and with Language Highlighted, Touch Select or Right to Open the
Language Menu.
Turn the Power Off and then Back On Again.
To Change to a different Language, Scroll Down to the desired
Language, then Touch Select to turn it On. There will be a Message
that tells you a Restart is Required to change to a different Language.
Turn the Power to the Spa Off and then back On again, and the Spa
System will start up again with the selected Language.
The Service Menu - WARNING! The Service Menu is only for experi-
enced Spa Electrical Technicians. The options that are available in the
Service Menu are only used for Spa Electrical Service, and are not
used in Normal Spa Operation.
To Open the Service Menu, in Navigation Mode, with Settings High-
lighted, Touch Select to Open the Settings Menu. Scroll Down , and
with Service Highlighted, Touch Select or Right to Open the Service
Menu WARNING Message. Continue below to Check the Spa Event
Log in the Service Menu.
Check the Spa Event Log from the Service Menu - You can Check
the Event Log for Information about your Spa. The Event Log records
Spa Events such as a Possible Freeze Condition, or if you have had
any Power outages.
To Check the Spa Event Log, in the Service Menu, from the WARNING
Screen, Touch Select to Open the Service Menu. With Event Log
Highlighted, Touch Select or Right to Open the Event Log Pages.
The Event Log will Display the 12 most recent Spa Events. Each Event
will have the Month, Day, and Hour that the Event occurred. Move
Down to the Next Page or Up to the Previous Page. Touch Left to Exit
Back to the Service Menu, or Touch Back Home to Exit to the Home
Screen.
Lock the Control Panel - You can Lock the Control Panel so that
none of the Panel Buttons operate. When the Panel is Locked, the
only User Input the System will recognise is the Unlock Code
Sequence.
To turn On Panel Lock, in Navigation Mode, with Settings Highlighted,
Touch Select to Open the Settings Menu. Scroll Down , and with Panel
Lock Highlighted, Touch Select to Lock the Control Panel.
Message will Auto Close in a few Seconds.
The Panel Lock Message appears on the Screen for a few seconds
after the Panel is Locked, and then it goes back to the Home Screen.
To Unlock the Control Panel, you Must Touch Select - Select - Up
within 3 seconds while the Panel Lock Message is displayed on the
Screen. Touch any Button to Display the Message again.
Lock the Water Temperature - You can Lock the Temperature
Adjustment so that the Water Set Temperature cannot be changed.
When the Temperature is Locked, you cannot change the Tempera-
ture with the Temp Button, and you cannot change the Temperature
on the Water Temperature Screen in Navigation Mode.
To turn On Temp Lock, in Navigation Mode; with Settings Highlighted,
Touch Select to Open the Settings Menu. Scroll Down , and with Temp
Lock Highlighted, Touch Select to Lock the Water Temperature.
Spa operation - Azure i212 CS Control Panel