Use and Care Manual

1 2

10. ASSEMBLY

Assembly work may only be performed by specialist personnel in accordance with the installation and operating ma-

nual and the regulations and standards in force.

e following points should be noted and followed:

■ Only suitable installation aids, in accordance with regulations, should be used.

■ e device must be installed in such a way that it is easily accessible for maintenance and cleaning purposes.

■ e unit should only be installed with authorized and suitable fastening materials at all fastening points.

■ Do not distort the unit when installing.

■ Just use the indicated mounting and ﬁxing places. No holes should be made in the housing or any screws screwed

into it.

■ e duct system must not be supported on the housing.

■ For structure-borne sound decoupling, a ﬂexible connection is recommended when connected on a duct system.

10.1. Installation with reduction

Size 150, 160, 200

1. Loosen bracket screws

2. a) Open brackets

b) Pull out the fan unit