Installation guide

Page 9 of 51
- Disable any wireless Ethernet adapters on the PC/Laptop
- Disable firewall and virus protection software
- Connect an Ethernet cross-over cable between the PC and ProtoNode and the PC
to the Hub/Switch using a straight cat5 cable
- The Default IP Address of the ProtoNode is 192.168.1.24, Subnet Mask is
255.255.255.0. If the PC and the ProtoNode are on different IP Networks, assign
a static IP Address to the PC on the 192.168.1.0 network.
- Double click on the “RUIPING” Utility. If the IP Address of the ProtoNode module
appears on the screen, the ProtoNode is running.
- Go to Start > Programs > Field Server Utilities > Ruiping Utility
Figure 6: RUIPING screen