Datasheet

ManualsBrandsCamtec ManualsBench Power SuppliesBench Top Power Supply, 30V, 33A, 1kW, Programmable

Camtec Power Supplies GmbH – Gewerbestrasse 30 – D-76327 Pfinztal – Germany

p.1/8 (12.2017.02.0)

Phone +49(721)46596-0 - Fax +49(721)46596-77 – www.camtec-gmbh.com - info@camtec-gmbh.com

(Subject to alterations. This product is not designed to be used in applications such as life support systems wherein a failure or malfunction could result in injury or death)

HSEUREG10001

1000W Programmable DC Lab Power Supply, TS35mm DIN-Rail

Specification:

• Save 0–Umax programming

• Multi interface 0-10V & 0-20mA

• Sense & Shutdown (remote ON/OFF)

• N+1 parallel operation

• Natural Convection

• Precise dynamic response on load change

• Designed for long life under full stress

• Strong input filters

• High reliability, shock & vibration proof

• EMC meets CE norm class B

• Over Voltage and continuous short circuit protection

• Double terminals 4x AWG20 – AWG6 (0,5 – 16mm²)

Models Programmable Voltage

HSEUREG100

01.015T

15Vdc / 50

HSEUREG100

01.030T

30Vdc / 33

HSEUREG100

01.050T

50Vdc / 20

HSEUREG100

01.090T

90Vdc / 11.2

HSEUREG100

01.130T

130Vdc / 7.8

HSEUREG100

01.180T

180Vdc / 5.6

Summary of content (8 pages)

PAGE 1
HSEUREG10001 1000W Programmable DC Lab Power Supply, TS35mm DIN-Rail Specification: • • • • • • Save 0–Umax programming Multi interface 0-10V & 0-20mA Sense & Shutdown (remote ON/OFF) N+1 parallel operation Natural Convection Precise dynamic response on load change • • • • • • Designed for long life under full stress Strong input filters High reliability, shock & vibration proof EMC meets CE norm class B Over Voltage and continuous short circuit protection Double terminals 4x AWG20 – AWG6 (0,5 – 16mm²)
PAGE 2
Technical Concept The Camtec HSEUREG models are high-precision lab power supplies „Made in Germany“. These power supplies are designed for power systems in the testing automation and for industrial use. For more than 20 years the Camtec Power Supplies manufactures high-end switch mode power supplies in Germany. A field breakdown of below 4 sigma over a 10 years period under review approves our ambitious quality concept.
PAGE 3
Technical Table AC Input AC Input Rating Rated DC Voltage 90..132Vac / 184..265Vac , 47…63Hz , 250…375Vdc 115Vac<13.2A 230Vac<6.5A 250Vdc<3.6A 375Vdc<2.4A 0-15V 0-30V 0-50V 0-90V 0-130V 0-180V Overvoltage Protection 18Vdc 35Vdc 59Vdc 105Vdc 150Vdc 210Vdc Rated DC Current 50.0A 33.0A 20.0A 11.2A 7.8A 5.6A Power Boost -25...+60°C <1min. 55.0A 35.3A 22.0A 12.3A 8.6A 6.1A Max. DC Current +70°C 37.5A 24.8A 15.0A 8.4A 5.9A 4.
PAGE 4
Manual und Technical Details Programming Time Vout [ms] Model HSEUREG07201 .018 .030 .060 .090 .130 .180 Rise Time 0-100%, 10/100% Last, [ms] typ. 15/15 15/15 15/15 15/15 15/15 15/15 Slew Rate 90-10%, 10/100% Last, [ms] typ. 19/1.9 62/6.2 30/3.0 34/3.4 31/3.1 60/6.0 Output Capacity, [mF] typ. 8.56 8.56 1.52 0.54 0.23 0.
PAGE 5
Compensation of Load Line Drop Voltage (Sense +/-), standard operation mode The HSEUREG power supply has a Sense Mode to compensate for the voltage drop over long load lines. The compensation amounts to a maximum of 2V per load line. Under certain circumstances, it can be expected to apply fairly more complicated external interference suppression. Sense operation: Connect the sense lines directly to the load. Pay attention to the polarity of plus and minus of the load to prevent damage to the power supply.
PAGE 6
Temperature Derating The maximum ambient temperature during operation is + 70°C. If the over temperature protection is activated, the power supply is switched off. The measuring point is 10mm outside the power supply. The power supply unit starts automatically when it has cooled down. Series Operation Two or more units of the same model and output voltage can be operated up to a total voltage of 240Vdc in series.
PAGE 7
Electrical Safety (Factory-Test / Fieldtest Owner) T A Type Test 60s 2500Vac Factory Test 5s 2000Vac Field Test 2s 2000Vac ¹) ≥60Vdc= 2400Vdc B 3000Vac 2000Vac 2000Vac C ¹) 500Vdc 500Vdc 500Vdc D 3000Vac 1000Vdc 1000Vdc Type and factory-test are reserved to the manufacturer. While repating damage can happen to the power supply unit.
PAGE 8
Ordering Information Output Type (DIN-Rail standard) Part Number 0-15V HSEUreg10001.015T 3041053001CA Remarks 0-30V HSEUreg10001.030T 3041053002CA 0-50V HSEUreg10001.050T 3041053003CA 0-90V HSEUreg10001.090T 3041053004CA 0-130V HSEUreg10001.130T 3041053005CA 0-180V HSEUreg10001.