User manual

IP Telephone User Guide

13 Specification

This appendix provides a complete technical specification of all the

features of the Flexor 500:

Feature Specification

Interfaces LAN Interface: Ethernet (10/100)

PC Interface: Ethernet (10/100)

Headset interface (2.5 mm.)

Full duplex speakerphone

LEDs: DND, MWI, Mute, Speaker, Headset, Line 1,

Line 2, Line 3, Line 4

Management Configuration, diagnostics, and firmware upgrade

locally or by operator.

HTTP/Web.

Through built-in display.

Quality of Service (QoS) Type of Service (ToS)

Unique Camrivox QoS features to prioritise voice

traffic over PC data traffic.

Power-On Self Test (POST) and diagnostics

Voice algorithms and protocols SIP, RTP, SDP

VAD, CNG, G.168 echo canceller, AEC

Packet Loss Compensator

G.711, G.726, G.729

Adaptive Jitter Buffer

DTMF detection, generation, and relay

PBX features Call hold, transfer, blocking, conference, and

forwarding.

Call history

Caller ID

IP features DHCP client, DNS client

ICMP, TCP/UDP/IP

NAT traversal and STUN

SNTP

HTTP

RIP and RIPv2

802.1Q VLAN

Physical dimensions Measurements: 170 x 180 x 90 mm

Weight: 350grams

Environmental 5C - 40C operating temperature

5% - 90% non-condensing humidity

Power supply (external) Input 100 - 240 VAC; 50/60 Hz; 0.5 A

Output 5.0 VDC; 1.5 A