User manual

IP Telephone User Guide
60
is as follows:
Characters Description
0, 1, 2, 3, 4, 5, 6,
7, 8, 9, #, *
Digits as dialled on phone.
x Any digit.
. (full stop) Repeat previous
expression (like * in Unix
regular expressions).
T Timeout – collect extra
digits, timing-out after 4
seconds.
| OR – separator between
expressions.
( ) Brackets are used to
group characters into a
single expression.
MapSDP M Boolean: 0 or 1. Use STUN to map ports in SDP
(or not).
Voicemail M Telephone number for voicemail.
Codec M List of codecs to support, in order of preference.
Country M Name of country.
StunSym M Boolean: 0 or 1. Disables STUN when symmetric
NAT detected.
End M Each section must be terminated with “End”.
Section – User
Field name Mandatory
or
Optional
Description
Username M SIP user name.
Password M SIP password.
Name M Friendly name of user.
Auth-Name O User name used for SIP Authentication.
End M Each section must be terminated with “End”.