User manual

IP Telephone User Guide
41
The firmware menu option provides the option to check for new firmware
and to see the current firmware version number. This may be required for
technical support questions.
The firmware screen reports the current product name and firmware
version. If there is a newer version of the firmware then an option is
provided to download this.
This provides a confirmation screen before downloading and installing the
new firmware.
The new firmware is downloaded from the Internet. A progress indicator
is shown during this process.
If an error is detected in the downloaded data then the download stops
and an option is available to retry the download.
During the firmware update you must not remove power from
the Flexor 500, or damage could occur. Do not remove the
power cable. When in doubt, wait several minutes to let the
unit go idle before removing the power.
W
arning