User manual

IP Telephone User Guide
37
The RTP and SIP DSCP are used by some service providers to give priority
to voice traffic over other network traffic. The values are 6 bits in binary
with a standard value of 001100.
T
he values should be entered as a series of binary digits using 1 and 0.
When the values have been set use the Apply soft key to store the new
settings.
Region
The region settings cover the country code, time zone and time format.
These may have been set by your ITSP.
A typical example of the settings is shown below.
The list of regions has most countries included. Use the Time soft key to
view a list of time zones and the
12/24 soft key to choose between 12 and
24 hour time display.
The actual time is downloaded from an Internet time server and does not
require manual setting.