Front Load Washing Machine Instruction Manual MODEL: WM950XE Please read this instruction manual carefully before you use this product
Contents Safety information _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Product description _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Control Panel _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Washing programmes _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Helpful hints and tips _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Installation Instruction Before the operation • This appliance is heavy. Care should be taken when moving it. • When unpacking the appliance, check that it is not damaged. If in doubt, do not use it and contact the Service Centre. • All packing and transit bolts must be removed before use. Serious damage can occur to the product and to property if this is not adhered to. See relevant section in the user manual.
Product description The detergent compartment The control panel Quick Guide 1. Install the washing machine 2. Load the laundry 3. measure out the detergent Basket Door handle 4. Close the machine door 5. Put down (hang up) the drain pipe 6. Turn on the water tap 7. Plug the power supply 8. Select the desired programme Service panel 9.
Control panel 1 ( RPM ) Kidswear High 0 (1200) Misty Washing Mid 8 (900) Low Underwear Extra ----No-Spin Rinse Water Level Temp.
SPIN SPEED button By pressing this button you can change the spin speed of the selected programme or to select Rinse Hold option. TEMPERATURE button This button is used to adjust the wash temperature.You can select different water temperature or no heating by pressing the button repeatedly. DELAY button This button is used for delay wash.You can get 0-24 hours through pressing this key contimously. The delay time means the wash will begin in 《xx》hours.
Optional Optional 10 4 3.5 3 1000 800 800 600 95 60 40 30 95 Heavy Synthetics Wool Silk Wash 60 95 Active enzyme Self-clean 1000 600 10 It means to add the detergent or the softener when it is needed. It means the detergent or the softener cannot be added.
Helpful hints and tips Sorting out the laundry Follow the wash code symbols on each garment label and the manufacturer’s washing instructions. Sort the laundry as follows: whites, coloureds, synthetics, delicates, woollens. Before loading the laundry Never wash whites and coloureds together. Whites may lose their «whiteness» in the wash. New coloured items may run in the first wash; they should therefore be washed separately the first time. Button up pillowcases, close zip fasteners, hooks and poppers.
First Use • Ensure that the electrical and water connections comply with the installation instructions. • Remove any material from the drum. • Run a cotton cycle at the highest temperature without any laundry in the machine, to remove any manufacturing residue from the drum and tub. Pour 1/2 a measure of detergent into the main wash compartment and start the machine.
Daily Use Load the laundry Open the door by carefully pulling the door handle outwards. Place the laundry in the drum, one item at a time, shaking them out as much as possible. Close the door. Measure out the detergent and the fabric softener Pull out the dispenser drawer until it stops. Measure out the amount of detergent required, pour it into the main wash compartment or in the appropriate compartment if the selected programme/option it requires (see more details in «Detergent dispenser drawer»).
Cancelling the Delay Start after having started the programme: 1. Set the washing machine to PAUSE by pressing button 5. 2. Press button 10 repeatedly until the display shows 0'. 3. Press button 5 again to start the programme. Important! • The door will be locked throughout the delay time. If you need to open the door, you must first set the washing machine to PAUSE by pressing button5 and wait a few minutes before opening the door. After you have closed the door, press the same button again.
Care and cleaning Warning! You must DISCONNECT the appliance from the electricity supply, before you can carry out any cleaning or maintenance work. Descaling The water we use normally contains lime. It is a good idea to periodically use a water softening powder in the machine. Do this separately from any laundry washing, and according to the softening powder manufacturer's instructions. This will help to prevent the formation of lime deposits.
Cleaning of the filter of the drainage pump If the machine cannot work normally or filter net of the drainage pump cannot be cleaned, pleasefollow the methods[1] below: 1 Close the water tap 2 Disconnect the power plug 3 If necessary,wait until the water has cooled down 4 Empty the water from the pump to a container cautiously . 5 Screw the pump cover out and clean the filter 6 Install the pump cover Pump cover Please clean the drainage pump regularly to prevent the sundries blocking the drainage pipe.
Warning! When the appliance is in use and depending on the programme selected there can be hot water in the pump. Never remove the pump cover during a wash cycle, always wait until the appliance has finished the cycle, and is empty. When replacing the cover, ensure it is securely retightened so as to stop leaks and young children being able to remove it. If you wash rugs, it is compulsory to inspect and clean the filter.
What to do if..... Certain problems are due to lack of simple maintenance or oversights, which can be solved easily without calling out an engineer. Malfunction The washing machine does not work Water leakage Before contacting your local Service Centre, please carry out the checks listed below. Possible Cause / Solution Close the washing machine's door. Press the <>button. Correctly connect the inlet water pipe.
Possible Cause / Solution Malfunction Foam spills from the detergent drawer The machine stops when the procedure has not been finished The drainage pump is noisy during operation after the water has been drained. The machine stops for some time during the wash procedure. Check if the amount of detergent is excessive, if it is the specialized detergent for the drum washing machine. Dip one scoop of the softener mixed with 1/2 liter of water to the detergent box II.
If you are unable to identify or solve the problem, contact our service centre. Before telephoning, make a note of the model, serial number and purchase date of your machine. The Service Centre will require this information. Technical data (8k g) kg) (7 8mm 6k g) ( 1 01 m m 9 48 495 Rated Mains Wash power Spin power Heat power mm 855mm 595mm Max. Power Water pressure Net weight Drain method Spin method Volume Spin Method Drain Method 17 220-240 V/ 50Hz 200W 400W 2000W 2200W 0.
Installation Unpacking the washing machine Unpack your washing machine and check if there is any damage during the transportation Also make sure that all the items in the attached bag are received if there is any damage to the washing machine during the transportation. Or any item is missing .Please contact the local dealer immediately. Dispose the packing materials The packing materials of this machine may be dangerous to kids.Please dispose them properly and avoid easy touch by kids.
3 4 Screw tight the tap in the direction of screw thread of the inlet hose. Connect the hose to the water inlet at the back of the washing machine. When connecting the water hose and the water tap, do not wear the screw. When connecting the screw thread of the inlet hose and the inlet valve, prevent the screw thread screwed incorrectly or it will wear or leak. To avoid the damage caused by the overbending of the inlet hose . Please check the inlet hose conditions regularly.
Electrical connection Information on the electrical connection is given on the rating plate on the inner edge of the appliance door. Check that your domestic electrical installation can take the maximum load required, also taking into account any other appliances in use. Caution! Connect the machine to an earthed socket. Caution! The manufacturer does not accept any responsibility for damage or injury through failure to comply with the above safety precaution.
