Instruction manual

Model 109SS Temperature Probe

5. Under the Available Sensors and Devices list, select the Sensors folder,

then select the Temperature sub-folder. Select 109 Temperature Probe.

Click to move the selection to the Selected device window. Data

defaults to degree Celsius. This can be changed by clicking the Deg C box

and selecting Deg F, for degrees Fahrenheit, or K, for Kelvin.

6. After selecting the sensor, click at the left of the screen on Wiring

Diagram to see how the sensor is to be wired to the datalogger. The

wiring diagram can be printed out now or after more sensors are added.

7. Select any other sensors you have, and then finish the remaining Short Cut

steps to complete the program. The remaining steps are outlined in Short

Cut Help, which is accessed by clicking on Help | Contents |

Programming Steps.