User guide

User Guide
5
Figure 4 Use of Terminal Blocks
5. Address Selection Switches
Each SDM-CD16D can have 1 of 16 addresses. The factory-set address is 00.
Table 2 shows switch position and the corresponding address. Figures 1 and
5 shows the position of the switch. Note that you will have to remove the
mounting bracket to gain access to this switch.
Table 2 Switch Position and Addresses
Switch Setting Base 4 Address
000
101
202
303
410
511
612
713
820
921
A22
B23
C30
D31
E32
F33
Use a screwdriver in appropriate slot
to release spring tension
Strip insulation
and insert wire