Specifications

Section 4. Maintenance, Troubleshooting, and Schematics
4.2.5 NAN or ±INF Stored in a Data Table
A. Something is wrong with the datalogger and/or sensor(s) if Short Cut or
VisualWeather was used to create the station program. Make sure the
sensor is plugged into the correct bulkhead connector.
If CRBasic is used to create the station program verify channel
assignments and multipliers. Datalogger program may need to be changed.
4.2.6 Communication Problems when using an RF450 Radio
LED Status
The RF450 has three red/green LED status indicator lights. Table 4.2-1 shows
the status of each light when the RF450 is in various states of communication.
SN:
CS I/O
CTS
TX
CD
RF450
1 Watt
Spread Spectrum
FIGURE 4.2-1. RF450 Front Side View
4-8