Specifications

Section 3. ET Software
The ET107 comes with a default program, and typically does not
require additional programming (see Appendix D).
NOTE
A variety of different software packages are available to work with the ET107 station. This
section introduces software packages that can be used with the ET107 station. It is not the
goal to fully explain capabilities of each package. All software packages mentioned below
come with extensive help files. Contact Campbell Scientific with questions and support. All
software includes installation instructions.
Free software packages include Short Cut for Windows (SCWIN) for programming the
station and PC200W which is used to communicate with a direct connect or short-haul
modem station and collect data. PC200W software cannot be used to communicate with
stations on a phone modem. Both packages can be downloaded from Campbell Scientific's
website www.campbellsci.com
.
VisualWeather version 3.0 or higher is designed to work with the ET107 station and can be
used to create programs, monitor present conditions, collect data, and create reports and
graphs. VisualWeather is designed to be a very user friendly program. No datalogger
experience is needed to use it. VisualWeather will communicate with a direct connect,
short-haul modem, RF radio, or phone modem station. Call Campbell Scientific for
pricing.
LoggerNet is a very powerful versatile package that requires some experience with
datalogger programming. LoggerNet is used to create custom programming for the station
as well as handling large networks of stations. LoggerNet is not as easy to use as
VisualWeather. Call Campbell Scientific for pricing.
3-1