Specifications

Section 2. Hardware Installation
2.3 Enclosure
The weather station datalogger, power supply, sensor connection panel,
communications devices, and data retrieval peripherals are mounted in the ET
enclosure. Refer to Appendix C.1 for a labeled, exploded view of the
enclosure.
Logan, Utah
MADE IN USA
Lightning
Rod
Tipping Bucket
Rain Gage
Pyranometer
Crossarm
Radiation
Shield
Met One 034B
Wind Set
ET Enclosure
Ground
Rod
FIGURE 2.3-1. ET107 Instrumentation Mounted on the ET Tower
2.3.1 Enclosure Installation
1. Mount the ET enclosure on the ET Tower as shown in Figure 2.3-2.
a. Remove the front lid. Remove the connector cover from the back of
the ET enclosure by loosening the Phillips screw at the bottom of the
cover.
2-7