Specifications

Section 2. Hardware Installation
DANGER: Do not install near power lines. If any part of the tower comes in contact with
power lines you could be KILLED. Contact local utilities for the location of buried utility
lines before digging or driving grounding rods.
CAUTION: Do not fit the 3 meter ET Tower sections together until the appropriate time.
Once attached, they cannot be detached.
The ET Tower provides a support structure for mounting the ET107 weather station
components. Figure 2.1-1 shows a typical ET Tower installation option. The tower is
designed to withstand winds of 100 mph. The lightning rod assembly is attached after the
instrumentation enclosure is installed.
User-Supplied
Valve Box
Swept Elbow
Conduit
FIGURE 2.1-1. ET Tower Installation
User supplies valve box at base of station and weatherproof
enclosure for transformer. See Figure 2.1-1.
NOTE
2-1