Instruction manual

WS-PRO2 Weather Station Manual
GT
27176
Page 50 of 61
6.2.0 Rain Gauge Installation
Pull the gold funnel up and off of the top of the rain gage. Remove the
rubber band holding the tipping mechanism in place. The rain gage
bubble level mounted on the tipping mechanism is dependant on how
vertical the pole was installed. Adjust the bolts at the bottom of the pole if
necessary. Put the gold funnel back on the top of the rain gage as in
figure 35.
Figure 35
6.3.0 Pyranometer
Level the pyranometer as indicated in Figure 36. Adjust the three leveling
screws until the bubble level indicates plumb. Remove the red or green
shipping cap from the pyranometer. See Figure 37.