Instruction manual

WS-PRO2 Weather Station Manual
GT
27176
Page 35 of 61
Figure 23
Connect the power and communication cables
NOTE It’s very important that each plug is completely seated on to the
connector and the locking ring turned ¼ revolutions clockwise. Failure to
seat the plug completely could cause corrosion and water damage to both
the enclosure and the sensor cable.
.
Earth Ground
Sensors
TEMP CS615
WS/WD
SDI 12
TEMP/SONIC
RAIN (PRECIP)
TEMP/RH
SOLAR RADIATION
COMM
POWER
BNC Coaxial
Connector
Standoff
Earth Ground
Sensors
TEMP CS615
WS/WD
SDI 12
TEMP/SONIC
RAIN (PRECIP)
TEMP/RH
SOLAR RADIATION
COMM
POWER
BNC Coaxial
Connector
Standoff