Instruction manual

WS-PRO2 Weather Station Manual
GT
27176
Page 15 of 61
3.0 Base Tower Installation
CAUTION: Do not fit the WS-PRO2 Tower sections together until the
appropriate time. Once attached, they cannot be detached.
The WS-PRO2 Tower provides a support structure for mounting the WS-PRO2
weather station components. Figure 10 shows a typical Tower installation option.
The tower is designed to withstand winds of 100 mph. The lightning rod
assembly is attached after the instrumentation enclosure is installed.
Figure 10
(Note: Figure 10 does not demonstrate the surge protection and grounding requirements
for the system)
3.0.1 Base Installation
3.0.1.1 Supplied Components
(3) ½ inch L-Bolts
(9) ½ inch Nuts
(1) Anchor Template
Refer to Section 2 for components supplied by installer.