User guide

User Guide
7
includes hardware for mounting to ground lug of CSI enclosures models
ENC 10/12, ENC 12/14, or ENC 16/18). Spark gap wiring is straight
through such that pin to pin continuity exists between the two modems. If
the modems are installed entirely within a building, the transient spark gap
protection is probably not needed.
Figure 4. Installation of Spark Gap Protection
Occasionally a customer needs to transmit data across longer or smaller gage
wires or at higher speeds than can be done with the RAD modem powered by
the SC105. RAD does sell a 9-volt power supply that will boost the signals
enough to meet some of these more demanding applications. Please contact
RAD for more information.