Instruction manual

SECTION 1. GENERAL RADIOTELEMETRY NETWORK
1-2
1.2 FIELD STATION
Purpose: The field station is where the
measurements are made. The
Campbell Scientific datalogger
resides at this station taking the
desired measurements. Any field
station can also operate as a
repeater. The only requirement is
that the station’s antenna must be
able to communicate in all desired
directions. This may require an
omnidirectional antenna.
Equipment Required:
• Radio
• RF Modem
• Antenna and antenna cable
• Datalogger
• Power supply, enclosure, sensors, and
mounting needs
FIGURE 1-2. CR10 Field Station